Ton bag scale, also known as big bag packing scale, is a large-scale weighing and packaging equipment, which is used in many industries because of its simple operation, high efficiency, and labor saving, and it is widely used. For this type of large equipment, repair and maintenance are very important tasks. Only by keeping the equipment in good condition at all times can it be put into use better. The following editor will briefly talk about its maintenance methods for you.
1. Clean the scale body
Cut off the power and unplug the power cord. Soak the gauze and wring it dry, then dipped in a little neutral cleaning solution, and then clean the weighing pan, display filter and other parts of the scale body of the ton bag scale.
Note: Do not use chemical solvents for cleaning. Avoid splashing water into the scale body during the cleaning process. If you accidentally splash into the scale body, you need to wait for the moisture to dry before turning on the power, otherwise it may cause an electric shock or damage the equipment .
2. Level correction
Check whether the ton bag scale is normal. If there is a tilt, you need to adjust the feet of the scale to place the blisters in the middle position.
3. Clean the printer
Cut off the power, open the plastic door on the right side of the scale body, grab the plum blossom handle on the outside of the printer, and drag the printer out of the scale body. Press the reed on the front of the printer, loosen the print head, wipe the print head with the print head cleaning pen in the accessory of the ton bag scale to remove the dirt on it, and cover the pen cap after wiping to prevent the cleaning fluid in the pen from evaporating , Let stand for about two minutes, wait for the cleaning fluid on the print head to evaporate, and then close the print head, push the printer back into the scale body, close the plastic door, and switch on the power for testing. If the print is clear, You can continue to use it normally.
Note: To clean the print head, use the cleaning pen that comes with the scale. If the cleaning liquid in the cleaning pen is used up, you can find some clean soft cloth, dipped in a little absolute alcohol to wipe it.
4. Initialization
The ton bag scale has the functions of zero tracking and resetting at power-on. The scale can be turned on to remove foreign objects on the weighing pan to ensure that the scale is turned on when there is wind. If there is a little weight display after turning on, you can press the "clear" key on the keyboard The scale returns to the zero position.
The above are the cleaning steps of the ton bag scale, I hope it can be helpful to you. Our company is a professional manufacturer, if you have relevant requirements, please contact us.