People often encounter many problems in the application of robot palletizers, especially in normal applications, they will find that automatic palletizers cannot go forward or backward. What is the reason?
If the automatic palletizer cannot move forward or backward normally during the operation, the direct cause may be the problem of the travel switch, such as unsuccessful positioning operation, or unstable route connected to the travel switch, or immediate common failure. Status. In this case, we can check the automatic stacking travel switch and the route around the travel switch. In addition, the damage of the moving route or the break of the control line is likely to cause the automatic palletizer to fail. It can go forward or backward normally. At this time, we can use a multimeter to check whether this problem has occurred. Naturally, the premise is that the switching power supply must be disconnected.
Naturally, if there is a problem with the relay or the relay circuit board, it is likely to interfere with the application of the automatic palletizer. In addition, the destruction of the AC contactor is likely to cause the common failure of the automatic palletizer. There are 2 pieces It is to remind you that in this case, the inverter can have frequency output.
For robot palletizer customers, the actual operation of the automatic palletizer must be terminated when the automatic palletizer cannot move forward or backward normally. Then, according to the many reasons mentioned above, continuous Pick and choose until you find the reason. Naturally, if our own level is limited, please ask others to check it for you. To prevent it from being self-maintenance, it will cause a lot of unnecessary cumbersomeness or increase maintenance costs.
