People often encounter many problems in the application of robot palletizers, especially in normal applications, they will find that the automatic palletizer cannot move forward or backward. What is the reason?
If the palletizer cannot move forward or backward normally during the operation, the main reason may be the problem of the limit switch, such as the unsuccessful limit operation, or the unstable route connected to the limit switch, or the condition of immediate common failure. In such a case, we can check the travel switch of the automatic palletizing and the route around the travel switch. In addition, the damage of the moving route or the interruption of the connecting line is likely to cause the palletizer to not move normally. Or backward. At this time, we can use a multimeter to check whether this problem has occurred. Naturally, the premise is that the power supply must be disconnected.
Naturally, if the relay or the relay circuit board has a problem with the automotive relay, it is likely to interfere with the application of the automatic palletizer. In addition, the destruction of the AC contactor is likely to cause the common failure of the palletizer. There are 2 things To remind you, in this case, the inverter can have frequency output.
For customers of fully automatic palletizers, when the palletizer cannot move forward or backward normally, the use of the palletizer must be stopped. Then, according to many of the reasons mentioned above, continuous selection is carried out until Find out the reason. Naturally, if our own level is relatively limited, please ask others to check it for you. To prevent many unnecessary inconveniences or increase maintenance costs due to self-maintenance.
