sinceTon bag packaging machineAfter it appeared, it significantly reduced a lot of manpower and material resources. In other words, the ton bag packaging machine can ease the packaging workload and also improve work efficiency. However, if it is used for a certain period of time, it may also cause some problems. Different problems are caused by different reasons, so you need to do a specific analysis specifically for the specific situation.
After that, we can adopt targeted solutions based on actual reasons. Everyone knows that only symptomatic treatment can bring it back to normal as soon as possible. For example, if it is found that the PLC of the ton bag packaging machine has not entered the situation, the possible reasons are:
1. The controller output data line is not plugged in properly;
2. The controller has no output;
3. The data line is damaged.
For the reasons described above, the corresponding methods you need to take are:
1. Insert the data cable of the big bag packaging machine again;
2. Check and replace the controller;
3. Replace the data cable as soon as possible.
In the process of operation, sometimes it is found that the solenoid valve has no signal. The reasons include: PLC no output, PLC output system is damaged, PLC is in the programming position, solenoid valve signal line is damaged.
For the reasons listed above, the corresponding methods you need to adopt are:
1. Replace the PLC of the ton bag packaging machine as soon as possible;
2. Adjust the PLC to a proper operating position;
3. Replace the signal line as soon as possible.
Another more common situation is that the cylinder of the big bag packaging machine suddenly fails to operate during the operation. The reasons for this situation are as follows: PLC has no output, solenoid valve is damaged, cylinder or air pipe is damaged, wiring is faulty, etc. In this case, everyone needs to replace and repair as soon as possible.
