What should be paid attention to when changing the material of the ton bag packaging machine?
Today, ton bag packaging machines are increasingly using plastic bags, which can not only save packaging costs, but more importantly, the low cost of packaging and handling. It is widely used in electric power, coal, petrochemical, fertilizer, food, feed, cement, metallurgy and other industries. Quantitative canning and packaging of granular and powdery materials in industries such as gold, environmental protection, building materials, medicine, ports, and biological engineering. Industrial occasions gradually promote the use of big bags, and small bags are mainly used for civilian use. Pouch packaging will gradually be replaced by bagging.
Ton bag packaging machine-usually equipped with a conveyor, the qualified packaging bags are transported outwards through the conveyor, and the packaging bags are unloaded by cranes and forklifts. Under normal circumstances, at the beginning of the feeding, both the large material door and the small material door of the packing machine are opened, and the large material door is quickly closed. The small door continues to feed for 2-3 seconds, and closes after reaching the fast value; the vibrating feeder continues to feed for 0.5-3 seconds. At the blanking point, the vibrating feeder is closed and the feeding is completed. If it is necessary to replace the packaging materials, under the one-bag silo of the current variety, manually open and close the large material door and small door of the ton bag packaging machine several times to remove residual materials; manually clean the vibrating feeder and vibrating feeder on the platform Residual materials should not be cleaned for a long time to avoid damage to the vibrating feeder. It must be noted that during the feeding process of the ton bag packaging machine, the set value, high speed value, fast value, drop and other parameters cannot be changed.
