Yantai Huaen Intelligent Technology Co., Ltd.
13688652827
ythen001@163.com
Home > news > Content
contact us

    Yantai Huaen Intelligent Technology Co., Ltd.
    Address: No. 11, Jinshajiang Road, Yantai Development Zone (Zhongchangxing Industrial Park)
    Sales Department Tel: 0535-6397784
    Mobile: 13688652827 (Manager Yu)
    Email: ythen001@163.com
    Website: http://www.yantaihuaen.com

Solutions to common failures of ton bag packaging machines

2021-10-26   

Since the emergence of the ton bag packaging machine, a lot of manpower and material resources have been significantly reduced. In other words, the ton bag packaging machine can reduce packaging labor and improve work efficiency. However, if it is applied for a certain period of time, it is very likely to cause some problems. Many of the differences are caused by different reasons, so everyone must do an in-depth analysis of the detailed situation professionally.

In the future, we can choose targeted solutions based on specific reasons. Everyone knows that only when the medication is guaranteed, can it be repaired to normal as soon as possible. For example, if it is found that the plc of the ton bag packaging machine is not entered, the possible reasons are:

1. The charging cable of the mobile phone output from the control board is not plugged in;

2. The control board has no output;

3. Damage to the mobile phone charging cable.

For the reasons described above, the way everyone must match is:

1. Insert the mobile phone charging cable of the big bag packaging machine again;

2. Query and replace the control board;

3. Replace the mobile phone charging cable with a new one as soon as possible.

In the process of operation, sometimes it is found that the relay has no signal. The reasons include: plc has no output, plc output system is damaged, plc is in the programming position, and relay signal line is damaged.

For the reasons listed above, the matching method that everyone must choose is:

1. Replace the plc of the ton bag packaging machine as soon as possible;

2. Adjust the plc to a suitable operating position;

3. Replace the signal line as soon as possible.

Another common situation is that during the operation of the big bag packaging machine, the cylinder in it suddenly fails to operate. This kind of situation can often occur, and the reasons are: PLC has no output, the relay is damaged, the cylinder or the air pipe is damaged, and what is wrong with the circuit. In that case, everyone must be replaced and overhauled as soon as possible.

吨袋包装机