We often encounter some problems in the process of using the robot palletizer, especially in the process of normal use, we will find that the automatic palletizer cannot move forward or backward. what is the reason?
If the stacker cannot move forward or backward normally during operation, the root cause may be a limit switch problem, such as a limit start failure, or an unstable circuit connected to the limit switch, or a direct failure. In this case, we can check the automatic palletizing limit switch and the circuit near the limit switch. In addition, the damage of the moving line or the disconnection of the control line may cause the stacker to not advance or retreat normally. At this point, we can use a multimeter to check whether this problem has occurred. Of course, the premise is that the power supply must be cut off.
Of course, if there is a problem with the relay or the relay circuit board, it may affect the use of the automatic palletizer. In addition, damage to the AC contactor may cause these failures of the palletizer. One thing to remind you, in this case will make the frequency converter output.
For users of automatic stackers, the operation of the stacker must be stopped when the stacker cannot advance or retreat normally. Then, according to some of the reasons mentioned above, carry out continuous screening until the reason is found. Of course, if our own level is limited, please ask someone to check it for us. Avoid unnecessary troubles or increase maintenance costs because of self-maintenance.
