Ton bag packaging machineGenerally equipped with a conveyor, the qualified packaging bags are transported out through the conveyor, so that the packaging bags can be removed by cranes and forklifts.
The application advantages and development trend of today's ton bag packaging machine are manifested in the fact that more and more finished materials are packaged in large bags, which can save packaging costs, packaging and handling costs are low, and are widely used in electricity, coal, petrochemical, chemical, fertilizer, and grain Quantitative canning and quantitative packaging of granular materials and powder materials in industries such as feed, cement, metallurgy, environmental protection, building materials, medicine, ports, and biological engineering. Industrial use occasions gradually promoted large packaging bags, and the use of small packaging bags was mainly for civilian use. Small bag packaging will gradually be replaced by big bag packaging.
Normally, the large material door and the small material door are opened together at the beginning of the feeding of the ton bag packaging machine, and the large material door is closed when the high-speed value is reached; the small material door continues to feed for 2-3 seconds, and the small material door is the fast value Close; the vibrating feeder continues to feed for 0.5-3 seconds. When the drop occurs, the vibrating feeder is closed and the feeding is completed.
If you need to replace the packaging materials, you should manually open and close the large material door and small material door of the ton bag packaging machine several times after the next bag of silo of the current type is finished to remove the remaining material; and go to the upper platform to manually clean up The remaining material in the vibrating feeder should not be opened for a long time to clean the material, so as not to damage the vibrating feeder.
In addition, be careful not to change the set value, high speed value, fast value and drop parameters during the feeding process of the ton bag packaging machine. The above parameters should be changed when the packaging is not started or the feeding is completed but the scale is not discharged, otherwise it will affect The weight of the bag; and it is necessary to manually check the movement of the large material door, small material door and vibrating feeder before use.
