We are usingTon bag packaging scaleYou may also encounter over-tolerance problems in the process. Do you know what the performance of the out-of-tolerance problem is? When we encounter this problem, what measures should we take to solve it? Below we will give a brief introduction to this problem, hoping to help you make better use of the ton bag packaging machine.
In fact, for ton bag packaging machines, the over-tolerance problem is a common problem. In actual work, the degree of over-tolerance is different. In other words, the cause of the problem varies. Let us analyze and see if we can take some measures to avoid these problems, so as to ensure the smooth progress of the work.
In actual work, sometimes this problem is more serious, but it may also be accompanied by some other problems, such as the abnormal large material door, small material door or weighing hopper door of the ton bag packaging machine. If we want to solve this problem fundamentally, then we'd better change the PLC output settings, but we also need to modify the corresponding program.
If the out-of-tolerance problem is not particularly serious, it only happens occasionally. During the observation process, it was also found that the octagonal door of the ton bag packaging machine was temporarily stuck when closed. Therefore, the measure we need to take at this time is to arrange for staff to regularly clean the dust on the material door to ensure its smoothness.
The above content is about the use of the ton bag packaging scale equipment, the cause and solution of the over-tolerance problem, I hope it will be helpful to you! It is recommended to pay attention to maintenance when using the ton bag packaging machine. If you have any other questions, you are welcome to inquire, thank you for your browsing and support!