The ton bag packaging machine not only plays the role of packaging, but also improves the production efficiency to a large extent, and brings greater economic benefits to the enterprise. In the process of using the packaging machine, many people may only know the use method and part of the use of the equipment, but they are still relatively unfamiliar with its debugging method. Next, the editor will briefly introduce to you the debugging method of the packaging machine, I hope it can be helpful to you.
1. Weighing and debugging method
Weighing adjustment is a common debugging method. The specific operation method can be operated by the method described in the controller manual.
2. Parameter setting method
There are many parameters that need to be set during the use of the ton bag packaging machine, and we can set them according to the usual parameter setting methods.
3. Material debugging method
Before debugging, we must first determine whether the packaging machine is operating normally and whether there is a malfunction. If a fault is found, the fault needs to be resolved first before subsequent debugging work.
4. Partial load debugging method
We can adjust by rotating the fine-tuning resistor, but if the rotation of the two groups is inconsistent, it will be more troublesome and will affect the resistance of the sensor itself, so we need to ensure that the error of each weighing point does not exceed 10G.
The above is a brief introduction to the debugging method of the ton bag packaging machine, do you understand it? Our company is a professional manufacturer. The products include packaging machines, packaging scales, filling machines, robotic palletizers, etc., with a rich variety, complete specifications and models, quality assurance, and reasonable prices. If you need it, welcome Call to order.
