Big bag packaging machineThese issues should be paid attention to during the maintenance process:
Abnormalities in pressing, cutting, and lap welding.
reason:
If there is a problem with the motor drive belt, it is recommended to replace it;
Common troubleshooting methods for the phenomenon of motor timing belt slipping, change the timing belt again;
Second, there is an abnormality in hot melt lap welding.
The heating device line interface is off, and the solution is enhanced.
The temperature difference of the heating equipment is too large or the efficiency of the power supply system is too large. The solution is to control the temperature difference of the heating equipment.
Oil and dust on the packaging between the roller and the guide rail, the solution is to clean up the oil and dust.
3. The output of the packing tape is abnormal:
Third, there is an abnormality in the wrapping operation.
Wrong assembly orientation, wrong belt threading, wrong solution, re-assemble.
The screw of the packing belt guide plate falls off, the solution is to tighten it.
Before the operation, the length of the belt has not been changed, and the solution should be changed again.
The roller and the guide rail move between each other to the oil or floating dust on the bag, the cleaning method is to clean.
